See how we made a giant, illuminated metal and wood lobby sign for the new office of Collective Health, an organization building a complete health benefits solution for leading U.S. companies.
See how we built and hung a 200 lb lobby sign for Slack without touching the wall.
When the president of JanSport assigns you homework, you do it.
Signs installed with adhesive may seem impossible to remove. The good news is that it's easier than you think with the right knowledge and tools.
This type of sign is ready to go, right out of the box. There is visible wiring, and is easy for anyone to install.
After some clever engineering, lots of sanding, and a few coats of delicious glaze, we made a confection even Homer Simpson would approve.
Take a few steps, and the entrance sign vanishes. How did that happen? Read on to see what tricks we have up our sleeves.
Paula Chang, co-founder of Tinkering Monkey, was featured in Rescue a CEO, a blog that helps entrepreneurs get tasks and projects completed.
Check out all the steps that it took to make this large illuminated sign for Bird—and the celebrity who posed with it when it was done.
A wall cleat, also known as a French cleat, is a way of securing a large sign to a wall. There’s two parts to the cleat: one half that’s mounted to the wall, and the other half with a matching [...]
Adhesive is the fastest and simplest way to install a sign. This is ideal for smaller or thinner signs, and works great on glass and tile.
Some lighthearted intro text goes here. Some lighthearted intro text goes here. v These are the color options we have available for our metal signs. Price will vary depending on finishing process [...]
Some of our signs have dark edges from the laser cutting process. A beam of intense infrared energy is focused onto the material, vaporizing it instantly and leaving a slightly scorched edge. [...]
We do not use high gloss finishes on our wood signs. Our finishes are used to highlight the natural beauty of the wood grain without making it appear fake or gaudy. Indoor signs are finished with [...]
This type of sign is permanently wired into the wall, with no visible cords. This installation requires a licensed electrician.
This type of sign installation includes gently pressing the posts (studs) on the back of your sign straight into the wall.